Blackberry Curve 8520 Trackpad Repair Guide

This video guide shows how to take apart and disassemble the Blackberry Curve 8520 cell phone to replace and repair the trackpad quickly and safely. This guide has been designed and put together by the Repairs Universe team.

This guide will help you to install the following Blackberry Curve 8520 replacement parts:

• Blackberry Curve 8520 / 8530 Trackpad Replacement part

Tools Required:

• Safe Open Pry Tool
• T6 Torx Screwdriver

Blackberry Curve 8520 Trackpad replacement take apart repair guide:

 

 

Blackberry Curve 8520 Trackpad Replacement Summary:

Using this summary in correlation with the video will insure proper instructions are given and a safe repair is made.

• The first step to disassembling the phone is to remove the back battery cover and battery as well as the sim card and memory card. Remove the screw using the T6 Torx screwdriver.

• Once the screws has been removed slide the metal frame to the right  then pick out the metal plate using the safe pry tool. Release the pop connection using a safe pry tool. Once release you can remove the track pad from the phone.

• To install the new track pad to the phone simply inside in place. Gently press down the pop connector until it clicks in place using a safe pry tool.

• Put the metal cover back put it in place in his form slide to the left. Once in place attach again using a T6 screw which you removed earlier.
  • Your new track pad is now ready to use.

  Notice:

  Repairs Universe's guides are for informational purposes only. Please click here for details.

  Learn about restrictions on reproduction and re-use of Repairs Universe's repair/take-apart/installation guides, and about creating hyperlinks to our guides.