Shopping Cart
Free Shipping On USA Orders Over $40

Repair Guides

iPhone 5S Take Apart Repair Guide

June 4, 2018 | 0 Comments

iPhone 5S Take Apart Repair Guide

The Repairs Universe Team flew all the way to Australia on release date to bring you the iPhone 5S repair guide first. This take apart repair guide will show you how to tear down the iPhone 5S to repair a broken or cracked screen or other internal components that you may need to replace.

This guide will help you to install the following iPhone 5S parts:

Recommended Tools:

iPhone 5S Take Apart Repair Guide

 

iPhone 5s Written TearDown Repair Guide

RepairsUniverse's Official iPhone 5s Teardown Repair Guide. The easy to follow step by step instructions we have provided will show you how to teardown and disassemble your Apple smartphone to replace or repair a damaged display assembly or internal component.

step01.jpg

Display Assembly

 

iphone5steardown01.jpg
  • To begin disassembling the iPhone 5c, locate and remove the two pentalobe screws on either side of the lightning dock connector port on the bottom of the iPhone.

 

step02.jpg

 

iphone5steardown02.jpg
warningsymbolsmall.jpg
Do not separate the display assembly completely from the iPhone 5s; there is a ribbon wire/cable for the home button still attached
  • Place a suction cup right above the home button on the front side of the display assembly. Using the spudger or pry tool, start to separate the display assembly from the rear case of the iPhone 5s.
  • Next, with the suction cup pull up on the display assembly while holding the outside frame of the iPhone down.

 

step03.jpg

 

iphone5steardown03.jpg
  • With the display assembly pulled up about one inch from the base of the iPhone, use the spudger to access and disconnect the ribbon wire/cable for the home button assembly.

 

step04.jpg

Display Assembly (Touch Screen and LCD)

 

iphone5steardown04.jpg
  • Now, locate and remove the four Phillips screws (#00) that secure the metal cover that is protecting the display assembly?s connections.

 

step05.jpg

 

iphone5steardown05.jpg
  • With the metal cover removed, use the spudger to pry up the three connections for the display assembly and front-facing camera and remove them from the motherboard.
  • You can now remove the display assembly from the iPhone 5s.

 

step06.jpg

Earpiece Speaker

 

iphone5steardown06.jpg
  • Locate and remove the two Phillips screws (#00) that secure the metal clip for the earpiece speaker to the display assembly.

 

step07.jpg

 

iphone5steardown07.jpg
  • Now that the metal clip is removed, you can lift up and remove the earpiece speaker from the display assembly.

 

step08.jpg

Front Facing Camera Assembly

 

iphone5steardown08.jpg
  • With the earpiece speaker removed, you can now peel the front-facing camera and sensor flex cable from the display assembly.
  • A small amount of adhesive is securing the front-facing camera to the display assembly. Gently work your way around the adhesive until the front-facing camera and sensor flex cable is free for removal.

 

step09.jpg

Home Button Assembly

 

iphone5steardown09.jpg
  • Locate and remove the three Phillips screws (#00) that secure the home button?s back plate in place, then remove the back plate from the iPhone 5s.

 

step10.jpg

 

iphone5steardown10.jpg
    • Use the spudger or tweezers to peel off the home button?s rubber surrounding. It is secured in place with a small amount of adhesive.
warningsymbolsmall.jpg
Be Careful not to tear the rubber gasket.
  • You can now remove the home button assembly from the iPhone 5s.

 

step11.jpg

SIM Card Tray

 

iphone5steardown11.jpg
  • With the SIM card removal tool or a paperclip, retract the SIM card tray out from the side of the iPhone.

 

step12.jpg

Battery

 

iphone5steardown12.jpg
  • Locate and remove the two Phillips screws (#00) that secure the battery connector?s cover in place, and then remove the cover from the iPhone.
  • With the cover removed, use the spudger to lift up and disconnect the connector for the battery from the motherboard.

 

step13.jpg

 

iphone5steardown13.jpg
  • The battery is secured to the phone with two strips of adhesive. Use the spudger to gently pry up and remove the battery from the iPhone 5s.

 

step14.jpg

Rear Facing Camera

 

iphone5steardown14.jpg
  • Use the tweezers to lift the rubber cover that is protecting the rear-facing camera.
  • Gently lift up and pry the connector plug for the rear-facing camera to free it for removal.
  • You can now remove the rear-facing camera from the iPhone 5s.

 

step15.jpg

Loudspeaker

 

iphone5steardown15.jpg
  • Locate and remove the seven Phillips screws (#00) that secure the loudspeaker and the lightning connector and headphone jack assembly to the iPhone.

 

step16.jpg

 

iphone5steardown16.jpg
  • With the securing screws removed, the loudspeaker is free to be removed from the iPhone. Use the tweezers to lift the speaker from the iPhone 5s.

 

step17.jpg

Lightning Port and Headphone Jack Assembly

 

iphone5steardown17.jpg
  • Use the spudger to gently pry up the lightning port and headphone jack flex cable to disconnect it from the motherboard..
  • The entire lightning port and headphone jack assembly is secured to the bottom of the iPhone with adhesive. Carefully maneuver the spudger under the assembly to free it from its location and remove it from the iPhone 5s.

 

step18.jpg

 

iphone5steardown18.jpg
  • Locate and remove the four standoffs and three Phillips screws (#00) that secure the motherboard to the body of the iPhone 5s.
  • *Use a small flathead screwdriver to remove the standoffs from the motherboard.

 

step19.jpg

 

iphone5steardown19.jpg
  • There are two final connections that need to be removed before you can lift the motherboard out of the iPhone.
  • The first connection is for the power & volume buttons that is on top of the motherboard, and the second is the coaxial connection that is on the bottom of the motherboard. Remove both of these connections.
  • You can now remove the motherboard from the iPhone 5s.

 

step20.jpg

 

iphone5steardown20.jpg
  • Locate and remove the three Phillips screws (#00) that secure the vibrator in place.
  • Remove the vibrator from the iPhone 5s.

 

step21.jpg

Volume and Power Button Assembly

 

iphone5steardown21.jpg
  • Locate and remove the seven Phillips screws (#00) that secure the volume and power button assembly to the body of the iPhone.
  • The ribbon cable for the volume and power button assembly is secured with a small amount of adhesive. Use the flat end of the spudger to lift and release the ribbon cable from the iPhone 5s.
  • You can now remove the volume & power button assembly from the iPhone 5s.

 

step22.jpg

Complete Breakdown of the iPhone 5s

 

iphone5steardown22.jpg
  • Major components displayed in this guide
  • Reverse the order of the steps to reassebly your device.

 

Notice:
RepairsUniverse does not accept any liability for damage, or injury caused, while you are following our teardown guides. We make no representations, warranties, or conditions of any kind, express or implied. Utilizing these guides to help assist you in repairing your mobile devices will void your warranty. RepairsUniverse strictly prohibits altering or modifying our teardown guides for commercial use, reproduction, or publication

iphone iphone-5s
leave a comment
Your email address will not be published. Required fields are marked *