LG Chocolate Touch VX8575 Screen Repair Take Apart Guide
This take apart repair guide shows how to disassemble the LG Chocolate Touch VX8575 quickly and safely. This guide was designed by the Repairs Universe team and can help you replace a cracked or damaged touch screen glass digitizer, and damaged and faulty LCD display screens, as well as other internal faulty parts.
This guide will help you to install the following LG Chocolate Touch VX8575 parts:
First, remove the battery. Next remove the six screw�located in Figure 1 using a small phillips screwdriver. Use a safe open pry tool to release the clips on the housing, around all four sides.
Most of the adhesive is located on the bottom section, you need to pry it up using a safe open pry tool. There are five screw which need to taken out using a small phillips screwdriver. There is also two circuit board ribbon clips you will need to release. These are the pop connectors located in Figure 2.
Remove the five small phillips screws located in Figure 3. Slowly pry the motherboard out.
Guide the two flex cables for the LCD screen and the glass touch screen digitizer through the housing. As shown in Figure 4.
Remove the LCD screen using a safe open pry tool. It may be adhered to the housing. The LCD screen can now be replaced.
Separate the LCD screen from the digitizer. Replace digitizer if cracked or non-functional.
Repairs Universe is a respected, leading provider of high quality LCD screen, touch glass and digitizer screen replacements and repair parts for iPhone, iPod, Blackberry, PSP, Zune, Droid, HTC, Nokia and many other cell phones.