Shopping Cart
Free Shipping On USA Orders Over $40

Repair Guides

HTC Legend Take Apart Repair Guide

June 4, 2018 | 0 Comments

HTC Legend Take Apart Repair Guide

View the downloadable version of our how to fix your HTC Legend screen guide.

This guide shows how to disassemble the HTC Legend cell phone quickly and safely. This guide is designed by the RepairsUniverse team.

This guide will help you to install the following HTC Legend parts:

Tools Required:

HTC Legend Take Apart Repair Guide:

  • The first step will be to pry up the back-bottom cover using safe open pry tool. Remove the battery and the sim card from the phone.
  • You will now need to unscrew five (4) screws using the T6 screwdriver located in figure 1.

 

legend1a.jpg

Figure 1

  • Pry up the back-top cover using safe open pry tool. Remove the two (2) screws using the T6 screwdriver located at the top of the phone.

 

legend2a.jpg

Figure 2

  • Now you can carefully pry the screen assembly and motherboard from the back housing. It may take some time to work the assembly out of place.
  • Once the screen assembly and motherboard have been removed, remove the 2 torx T6 screws located in figure 3. You can now remove the lower assembly.
  • Remove the plastic housing on the back side of the assembly by using a safe open pry tool to carefully unclip the housing.     

 

legend3a.jpg

Figure 3

  • The motherboard will now be exposed. Use a safe open pry tool to release the 3 connectors located on the motherboard. If the connection is a "jaw" connector, simply lift the lip and carefully slide out the cable.
  • Once the screen is completely released, you can take it out of the assembly.

 

legend4a.jpg

Figure 4

  • You can now heat the front of the screen assembly to warm the adhesive. Use a heat gun or hair dryer on a medium setting for about 45 seconds, using quick movements around the outside edges.
  • Use a safe open pry tool to pry between the touch screen digitizer and front frame, carefully releasing it from the housing. Reheat if necessary.
  • Carefully release the touch screen flex cable from the back of the screen assembly and feed it through the housing to fully remove the digitizer.
  • Applying Adhesive to the Touch Screen Digitizer:

    Simply replace the damaged parts with the new ones and reverse the order to put your phone back together again.

    Notice:

    Repairs Universe's guides are for informational purposes only. Please click here for details.
    Learn about restrictions on reproduction and re-use of Repairs Universe's repair/take-apart/installation guides, and about creating hyperlinks to our guides.

    htc htc-legend
    leave a comment
    Your email address will not be published. Required fields are marked *